On today’s episode of Uncanny Valley, we discuss how WIRED was able to legally 3D-print the same gun allegedly used by Luigi Mangione, and where US law stands on the technology.
On today’s episode of Uncanny Valley, we discuss how WIRED was able to legally 3D-print the same gun allegedly used by Luigi Mangione, and where US law stands on the technology.
Uhhhh my friend you can print a 9mm CZ scorpion that shoots as well as the real thing. Same with an MP5. You can find videos of them being tested and shot on the internet. A lot has changed in the past few years with 3D printed guns.
https://youtube.com/watch?v=kucefQ6sYbo there are silly videos too
Of course, they are not 100% plastic, but that’s irrelevant. They can be made at home with little effort using a 3D printer and from simple materials anyone can buy at a hardware store, without any registration or serial numbers.
A lot of “real” guns are made from plastic, too, btw
Only the non critical to function parts can be plastic. IE, the barrel can’t be plastic. And you can use literally anything else other than 3D printed stuff.
So why is 3D printed even an issue. Anything… A CNC, scissors, metal, a grinder, wood, springs, screws…can be made part of or be used to make anything else. Making things is not magic and a 3D printer is not magic either.
The highest pressure rated plastic has a Ts or just maybe 28ksi. But with 15% elongation and a really weak modulus. So you can make toys basically.
In the United States, only the lower is considered a gun. There’s no check needed to buy the barrel or slide components, meaning you can print the lower, preferably from a fiber reinforced material, and just slap the unregulated upper components into it.
You kidding? I know nothing about these things but that sounds just wrong.
Nope, not kidding. the receiver is the component that is registered as a firearm, and the rest of the parts that go in it are unregulated. That’s also why you may have heard of “80%” receivers. They’re not machined all of the way so they are not considered firearms and the purchaser can then finish the machining and install the parts.