• @glue_snorter@lemmy.sdfeu.org
    link
    fedilink
    English
    31 year ago

    I have an always-on vpn container and a transmission server container on my home server. Then I use transmission as a client on my laptop and I don’t need to continually connect and disconnect.

    Any interest in a how-to guide? I won’t get to it for at least two weeks, mind.

      • @glue_snorter@lemmy.sdfeu.org
        link
        fedilink
        English
        11 year ago

        Implementation of VPN’d torrent client

        This is how I torrent over Mullvad. I have no hesitation to recommend Mullvad - but I am not a crypto or security expert.

        The main image fails closed - if the VPN goes down, transmission disconnects.

        This setup also includes a SOCKS server that proxies your traffic over the same VPN. I use a separate browser (librewolf) and set the SOCKS proxy to :2020 including sending DNS over SOCKS. That’s because my country blocks piracy-related sites at the DNS level. If you don’t need this, you can delete the socks section of the docker-compose file.

        On my ubuntu laptop, I install transmission-remote-gtk in order to click on a magnet link and have it added. Otherwise you have to browse to the container’s web interface, which gets tiresome.

        I have this installed as a systemd service so it runs on boot. I use the systemd state and credential features as a safeguard against my own mistakes with permissions, but my long-term goal is to encrypt these files on disk. Linux can be pwned - I have read that around 35% of botnet nodes are linux (although these are presumably mostly weak IoT devices). The secondary benefit of the LoadCredential/CREDENTIALS_DIRECTORY mechanism is that it doesn’t expose secrets as environment variables.

        The p2p.service file needs to be in that path, but you can put the other files wherever you want.

        Known issues / todo list

        • The socks proxy sometimes falls over, I haven’t looked into why
        • The downloaded files will be owned by root, since that’s what the container runs as

        File contents

        /root/.secrets/mullvad:

        123456789
        ""
        

        For mullvad, there is no password, only an account number. I believe that the empty quotes are necessary. This file should be owned by root and chmod 600; containing dir should be 700. Replace the account number with your own account, obvs!

        /etc/systemd/system/p2p.service:

        [Unit]
        Description=p2p
        Requires=docker.service multi-user.target
        After=docker.service network-online.target dhcpd.service
        
        [Service]
        Restart=always
        RemainAfterExit=yes
        WorkingDirectory=/usr/local/bin/p2p
        ExecStart=docker compose up --remove-orphans
        ExecStop=docker compose down
        LoadCredential=mullvad:/root/.secrets/mullvad
        DynamicUser=yes
        SupplementaryGroups=docker
        StateDirectory=p2p
        StateDirectoryMode=700
        
        [Install]
        WantedBy=multi-user.target
        

        /usr/local/bin/p2p/docker-compose.yml:

        ---
        version: "3.7"
        
        services:
          p2p:
            restart: always
            container_name: p2p
            image: haugene/transmission-openvpn   # see also: https://www.nickkjolsing.com/posts/dockermullvadvpn/
            cap_add:
              - NET_ADMIN
            sysctls:
              - "net.ipv6.conf.all.disable_ipv6=0"  # ipv6 must be enabled for Mullvad to work
            volumes:
              - ${STATE_DIRECTORY:-./config/}:/config   # dir managed by systemd - but defaults to ./config if running interactively
              - ${CREDENTIALS_DIRECTORY:-.}/mullvad:/config/openvpn-credentials.txt:ro  # var populated by LoadCredential - but defaults to ./mullvad if running interactively
              - transmission:/data
              - transmission_incomplete:/data/incomplete
              - /my/directory/Downloads:/data/completed
            environment:
              - OPENVPN_PROVIDER=MULLVAD
              - OPENVPN_CONFIG=se_all  # sweden
              - LOCAL_NETWORK=192.168.1.0/24    # put your own LAN network here - in most cases it should end in .0/24
              - TRANSMISSION_WEB_UI=flood-for-transmission  # optional
            ports:
              - 9091:9091
              - 80:9091
              - 2020:2020
        
          socks:
            restart: always
            container_name: socks
            image: lthn/dante
            network_mode: "service:p2p"
            volumes:
              - ./sockd.conf:/etc/sockd.conf
            depends_on:
              - p2p
        
        volumes:
          transmission:
            external: false
          transmission_completed:
            external: false
          transmission_incomplete:
            external: false
        

        /usr/local/bin/p2p/sockd.conf:

        logoutput: stderr
        # debug: 2
        internal: 0.0.0.0 port = 2020
        external: tun0
        external.rotation: route
        
        clientmethod: none
        socksmethod: username none
        
        user.privileged: root
        user.notprivileged: nobody
        user.unprivileged: sockd
        
        # Allow everyone to connect to this server.
        client pass {
            from: 0.0.0.0/0 to: 0.0.0.0/0
            log: connect error  # disconnect
        }
        
        # Allow all operations for connected clients on this server.
        socks pass {
            from: 0.0.0.0/0 to: 0.0.0.0/0
            command: bind connect udpassociate
            log: error  # connect disconnect iooperation
            #socksmethod: username
        }
        # Allow all inbound packets.
        socks pass {
            from: 0.0.0.0/0 to: 0.0.0.0/0
            command: bindreply udpreply
            log: error  # connect disconnect iooperation
        }
        

        Steps

        1. Install docker and docker-compose, e.g. with sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
        2. Create the files with contents as above
        3. sudo systemctl enable p2p
        4. sudo systemctl start p2p
        5. Check what it’s doing: systemctl status p2p
        6. On first start, it will take a few minutes to pull the images
        7. To debug interactively while also passing the creds, use sudo systemd-run -P --wait -p LoadCredential=mullvad:/root/.secrets/mullvad docker compose up --remove-orphans
        8. Every so often, cd into /usr/local/bin/p2p and run docker compose pull to update the images.
    • @boonhet@lemm.ee
      link
      fedilink
      English
      11 year ago

      Don’t need it personally, but someone else might, so definitely post it when you feel like doing some writing.