• @glue_snorter@lemmy.sdfeu.org
      link
      fedilink
      English
      11 year ago

      Implementation of VPN’d torrent client

      This is how I torrent over Mullvad. I have no hesitation to recommend Mullvad - but I am not a crypto or security expert.

      The main image fails closed - if the VPN goes down, transmission disconnects.

      This setup also includes a SOCKS server that proxies your traffic over the same VPN. I use a separate browser (librewolf) and set the SOCKS proxy to :2020 including sending DNS over SOCKS. That’s because my country blocks piracy-related sites at the DNS level. If you don’t need this, you can delete the socks section of the docker-compose file.

      On my ubuntu laptop, I install transmission-remote-gtk in order to click on a magnet link and have it added. Otherwise you have to browse to the container’s web interface, which gets tiresome.

      I have this installed as a systemd service so it runs on boot. I use the systemd state and credential features as a safeguard against my own mistakes with permissions, but my long-term goal is to encrypt these files on disk. Linux can be pwned - I have read that around 35% of botnet nodes are linux (although these are presumably mostly weak IoT devices). The secondary benefit of the LoadCredential/CREDENTIALS_DIRECTORY mechanism is that it doesn’t expose secrets as environment variables.

      The p2p.service file needs to be in that path, but you can put the other files wherever you want.

      Known issues / todo list

      • The socks proxy sometimes falls over, I haven’t looked into why
      • The downloaded files will be owned by root, since that’s what the container runs as

      File contents

      /root/.secrets/mullvad:

      123456789
      ""
      

      For mullvad, there is no password, only an account number. I believe that the empty quotes are necessary. This file should be owned by root and chmod 600; containing dir should be 700. Replace the account number with your own account, obvs!

      /etc/systemd/system/p2p.service:

      [Unit]
      Description=p2p
      Requires=docker.service multi-user.target
      After=docker.service network-online.target dhcpd.service
      
      [Service]
      Restart=always
      RemainAfterExit=yes
      WorkingDirectory=/usr/local/bin/p2p
      ExecStart=docker compose up --remove-orphans
      ExecStop=docker compose down
      LoadCredential=mullvad:/root/.secrets/mullvad
      DynamicUser=yes
      SupplementaryGroups=docker
      StateDirectory=p2p
      StateDirectoryMode=700
      
      [Install]
      WantedBy=multi-user.target
      

      /usr/local/bin/p2p/docker-compose.yml:

      ---
      version: "3.7"
      
      services:
        p2p:
          restart: always
          container_name: p2p
          image: haugene/transmission-openvpn   # see also: https://www.nickkjolsing.com/posts/dockermullvadvpn/
          cap_add:
            - NET_ADMIN
          sysctls:
            - "net.ipv6.conf.all.disable_ipv6=0"  # ipv6 must be enabled for Mullvad to work
          volumes:
            - ${STATE_DIRECTORY:-./config/}:/config   # dir managed by systemd - but defaults to ./config if running interactively
            - ${CREDENTIALS_DIRECTORY:-.}/mullvad:/config/openvpn-credentials.txt:ro  # var populated by LoadCredential - but defaults to ./mullvad if running interactively
            - transmission:/data
            - transmission_incomplete:/data/incomplete
            - /my/directory/Downloads:/data/completed
          environment:
            - OPENVPN_PROVIDER=MULLVAD
            - OPENVPN_CONFIG=se_all  # sweden
            - LOCAL_NETWORK=192.168.1.0/24    # put your own LAN network here - in most cases it should end in .0/24
            - TRANSMISSION_WEB_UI=flood-for-transmission  # optional
          ports:
            - 9091:9091
            - 80:9091
            - 2020:2020
      
        socks:
          restart: always
          container_name: socks
          image: lthn/dante
          network_mode: "service:p2p"
          volumes:
            - ./sockd.conf:/etc/sockd.conf
          depends_on:
            - p2p
      
      volumes:
        transmission:
          external: false
        transmission_completed:
          external: false
        transmission_incomplete:
          external: false
      

      /usr/local/bin/p2p/sockd.conf:

      logoutput: stderr
      # debug: 2
      internal: 0.0.0.0 port = 2020
      external: tun0
      external.rotation: route
      
      clientmethod: none
      socksmethod: username none
      
      user.privileged: root
      user.notprivileged: nobody
      user.unprivileged: sockd
      
      # Allow everyone to connect to this server.
      client pass {
          from: 0.0.0.0/0 to: 0.0.0.0/0
          log: connect error  # disconnect
      }
      
      # Allow all operations for connected clients on this server.
      socks pass {
          from: 0.0.0.0/0 to: 0.0.0.0/0
          command: bind connect udpassociate
          log: error  # connect disconnect iooperation
          #socksmethod: username
      }
      # Allow all inbound packets.
      socks pass {
          from: 0.0.0.0/0 to: 0.0.0.0/0
          command: bindreply udpreply
          log: error  # connect disconnect iooperation
      }
      

      Steps

      1. Install docker and docker-compose, e.g. with sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
      2. Create the files with contents as above
      3. sudo systemctl enable p2p
      4. sudo systemctl start p2p
      5. Check what it’s doing: systemctl status p2p
      6. On first start, it will take a few minutes to pull the images
      7. To debug interactively while also passing the creds, use sudo systemd-run -P --wait -p LoadCredential=mullvad:/root/.secrets/mullvad docker compose up --remove-orphans
      8. Every so often, cd into /usr/local/bin/p2p and run docker compose pull to update the images.